Modelica.SIunits.UsersGuide Modelica.SIunits.UsersGuide

Library SIunits is a free Modelica package providing predefined types, such as Mass, Length, Time, based on the international standard on units.

Extends from Modelica.Icons.Information (Icon for general information packages).

Package Content

Name Description
Modelica.SIunits.UsersGuide.HowToUseSIunits HowToUseSIunits How to use SIunits
Modelica.SIunits.UsersGuide.Conventions Conventions Conventions
Modelica.SIunits.UsersGuide.Literature Literature Literature
Modelica.SIunits.UsersGuide.Contact Contact Contact

Modelica.SIunits.UsersGuide.HowToUseSIunits Modelica.SIunits.UsersGuide.HowToUseSIunits

When implementing a Modelica model, every variable needs to be declared. Physical variables should be declared with a unit. The basic approach in Modelica is that the unit attribute of a variable is the unit in which the equations are written, for example:

   model MassOnGround
     parameter Real m(quantity="Mass", unit="kg") "Mass";
     parameter Real f(quantity="Force", unit="N") "Driving force";
     Real s(unit="m") "Position of mass";
     Real v(unit="m/s") "Velocity of mass";
   equation
     der(s) = v;
     m*der(v) = f;
   end MassOnGround;

This means that the equations in the equation section are only correct for the specified units. A different issue is the user interface, i.e., in which unit the variable is presented to the user in graphical user interfaces, both for input (e.g., parameter menu), as well as for output (e.g., in the plot window). Preferably, the Modelica tool should provide a list of units from which the user can select, e.g., "m", "cm", "km", "inch" for quantity "Length". When storing the value in the model as a Modelica modifier, it has to be converted to the unit defined in the declaration. Additionally, the unit used in the graphical user interface has to be stored. In order to have a standardized way of doing this, Modelica provides the following three attributes for a variable of type Real:

Note, a unit, such as "N.m", is not sufficient to define uniquely the physical quantity, since, e.g., "N.m" might be either "torque" or "energy". The "quantity" attribute might therefore be used by a tool to select the corresponding menu from which the user can select a unit for the corresponding variable.

For example, after providing a value for "m" and "f" in a parameter menu of an instance of MassOnGround, a tool might generate the following code:

   MassOnGround myObject(m(displayUnit="g")=2, f=3);

The meaning is that in the equations a value of "2" is used and that in the graphical user interface a value of "2000" should be used, together with the unit "g" from the unit set "Mass" (= the quantity name). Note, according to the Modelica specification a tool might ignore the "displayUnit" attribute.

In order to help the Modelica model developer, the Modelica.SIunits library provides about 450 predefined type names, together with values for the attributes quantity, unit and sometimes displayUnit and min. The unit is always selected as SI-unit according to the ISO standard. The type and the quantity names are the quantity names used in the ISO standard. "quantity" and "unit" are defined as "final" in order that they cannot be modified. Attributes "displayUnit" and "min" can, however, be changed in a model via a modification. The example above, might therefore be alternatively also defined as:

   model MassOnGround
     parameter Modelica.SIunits.Mass  m "Mass";
     parameter Modelica.SIunits.Force f "Driving force";
     ...
   end MassOnGround;

or in a short hand notation as

   model MassOnGround
     import SI = Modelica.SIunits;
     parameter SI.Mass  m "Mass";
     parameter SI.Force f "Driving force";
     ...
   end MassOnGround;

For some often used Non SI-units (like hour), some additional type definitions are present as Modelica.SIunits.Conversions.NonSIunits. If this is not sufficient, the user has to define its own types or use the attributes directly in the declaration as in the example at the beginning.

Complex units are also included in Modelica.SIunits. A complex unit is declared as:

  model QuasiStationaryMachine
    parameter Modelica.SIunits.ComplexPower SNominal = Complex(10000,4400)
       "Nominal complex power";
   ...
   end QuasiStationaryMachine;

Extends from Modelica.Icons.Information (Icon for general information packages).

Modelica.SIunits.UsersGuide.Conventions Modelica.SIunits.UsersGuide.Conventions

The following conventions are used in package SIunits:

Extends from Modelica.Icons.Information (Icon for general information packages).

Modelica.SIunits.UsersGuide.Literature Modelica.SIunits.UsersGuide.Literature

This package is based on the following references

ISO 31-1992:
General principles concerning quantities, units and symbols.
 
ISO 1000-1992:
SI units and recommendations for the use of their multiples and of certain other units.
 
Cardarelli F.:
Scientific Unit Conversion - A Practical Guide to Metrication. Springer 1997.

Extends from Modelica.Icons.References (Icon for external references).

Modelica.SIunits.UsersGuide.Contact Modelica.SIunits.UsersGuide.Contact

Main Author:
Martin Otter
Deutsches Zentrum für Luft und Raumfahrt e.V. (DLR)
Institut für Robotik und Mechatronik
Abteilung für Entwurfsorientierte Regelungstechnik
Postfach 1116
D-82230 Wessling
Germany
email: [email protected]

Acknowledgements:

Extends from Modelica.Icons.Contact (Icon for contact information).

Automatically generated Tue Apr 05 09:37:09 2016.