Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces

Interfaces for AC multiphase models

Information

Extends from Modelica.Icons.InterfacesPackage (Icon for packages containing interfaces).

Package Content

Name	Description
Plug	Basic multiphase plug
PositivePlug	Positive multiphase connector
NegativePlug	Negative multiphase connector
TwoPlug	Two plugs with pin-adapter
OnePort
AbsoluteSensor	Partial potential sensor
RelativeSensor	Partial voltage / current sensor
Source	Partial voltage / current source
ReferenceSource	Partial of voltage or current source with reference input

Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces.Plug

Basic multiphase plug

Information

This multiphase plug contains a vector of m single phase pins. The positive and negative plug are derived from this base connector.

See also

Pin, PositivePin, NegativePin, PositivePlug, NegativePlug

Parameters

Contents

Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces.PositivePlug

Positive multiphase connector

Information

The positive plug is based on Plug. Additionally the reference angle is specified in the connector. The time derivative of the reference angle is the actual angular velocity of each quasi stationary voltage and current. The symbol is also designed such way to look different than the negative plug.

See also

Pin, PositivePin, NegativePin, Plug, NegativePlug

Extends from Plug (Basic multiphase plug).

Parameters

Contents

Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces.NegativePlug

Negative multiphase connector

Information

The negative plug is based on Plug. Additionally the reference angle is specified in the connector. The time derivative of the reference angle is the actual angular velocity of each quasi stationary voltage and current. The symbol is also designed such way to look different than the positive plug.

See also

Pin, PositivePin, NegativePin, Plug, PositivePlug,

Extends from Plug (Basic multiphase plug).

Parameters

Contents

Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces.TwoPlug

Two plugs with pin-adapter

Information

This partial model uses a positive and negative plug and defines the complex voltage differences as well as the complex currents (into the positive plug). A positive and a negative adapter are used to give easy access to the single pins of both plugs. Additionally, the angular velocity of the quasi stationary system is explicitly defined as variable. This model is mainly intended to be used with graphical representation of user models.

See also

PositivePlug, NegativePlug,

Parameters

Connectors

Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces.OnePort

Parameters

Connectors

Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces.AbsoluteSensor

Partial potential sensor

Information

The absolute sensor partial model relies on the a positive plug to measure the complex potential. Additionally this model contains a proper icon and a definition of the angular velocity.

See also

RelativeSensor, SinglePhase.Interfaces.AbsoluteSensor, SinglePhase.Interfaces.RelativeSensor

Extends from Modelica.Icons.RotationalSensor (Icon representing a round measurement device).

Parameters

Connectors

Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces.RelativeSensor

Partial voltage / current sensor

Information

The relative sensor partial model relies on the TwoPlug to measure the complex voltages, currents or power. Additionally this model contains a proper icon and a definition of the angular velocity.

See also

AbsoluteSensor, SinglePhase.Interfaces.AbsoluteSensor, SinglePhase.Interfaces.RelativeSensor

Extends from Modelica.Icons.RotationalSensor (Icon representing a round measurement device), TwoPlug (Two plugs with pin-adapter).

Parameters

Connectors

Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces.Source

Partial voltage / current source

Information

The source partial model relies on the TwoPlug and contains a proper icon.

See also

VoltageSource, VariableVoltageSource, CurrentSource, VariableCurrentSource, SinglePhase.Interfaces.Source.

Extends from OnePort.

Parameters

Connectors

Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces.ReferenceSource

Partial of voltage or current source with reference input

Information

The source partial model relies on the TwoPlug and contains a proper icon.

See also

VoltageSource, VariableVoltageSource, CurrentSource, VariableCurrentSource, SinglePhase.Interfaces.Source.

Extends from Modelica.Electrical.QuasiStationary.MultiPhase.Interfaces.OnePort.

Parameters

Connectors