Annex60.Fluid.HeatExchangers.ActiveBeams.Data.Trox

IEA EBC Annex 60

Annex60.Fluid.HeatExchangers.ActiveBeams.Data.Trox

Performance data for Trox

Information

Package with performance data for active beams from Trox.

Package Content

Name	Description
DID632A_nozzleH_length6ft_cooling	Performance data for Trox DID 632A for cooling mode
DID632A_nozzleH_length6ft_heating	Performance data for Trox DID 632A for heating mode

Annex60.Fluid.HeatExchangers.ActiveBeams.Data.Trox.DID632A_nozzleH_length6ft_cooling

Performance data for Trox DID 632A for cooling mode

Information

Performance data for Trox active beam for cooling mode.

Extends from Annex60.Fluid.HeatExchangers.ActiveBeams.Data.Generic (Generic data record for active beam).

Parameters

Type	Name	Default	Description
Nominal condition
MassFlowRate	mAir_flow_nominal	0.0792	Nominal air mass flow rate per beam [kg/s]
MassFlowRate	mWat_flow_nominal	0.094	Nominal water mass flow rate per beam [kg/s]
PressureDifference	dpWat_nominal	10000	Water-side nominal pressure drop per beam [Pa]
PressureDifference	dpAir_nominal	100	Air-side nominal pressure drop [Pa]
TemperatureDifference	dT_nominal	-10	Nominal temperature difference water inlet minus room air [K]
HeatFlowRate	Q_flow_nominal	-1092	Nominal capacity per beam [W]

Modelica definition

record DID632A_nozzleH_length6ft_cooling = Annex60.Fluid.HeatExchangers.ActiveBeams.Data.Generic ( primaryAir( r_V = {0,0.714286, 1,1.2857}, f = {0,0.823403, 1,1.1256}), dT( f = {0,0.5,1}, r_dT= {0,0.5,1}), water( r_V = {0,0.33333,0.5,0.666667,0.833333,1,1.333333}, f = {0,0.71,0.85,0.92,0.97,1,1.04}), mAir_flow_nominal=0.0792, mWat_flow_nominal = 0.094, dpWat_nominal = 10000, dpAir_nominal = 100, dT_nominal = -10, Q_flow_nominal = -1092) "Performance data for Trox DID 632A for cooling mode";

Annex60.Fluid.HeatExchangers.ActiveBeams.Data.Trox.DID632A_nozzleH_length6ft_heating

Performance data for Trox DID 632A for heating mode

Information

Performance data for Trox active beam for heating mode.

Extends from Annex60.Fluid.HeatExchangers.ActiveBeams.Data.Generic (Generic data record for active beam).

Parameters

Type	Name	Default	Description
Nominal condition
MassFlowRate	mAir_flow_nominal	0.0792	Nominal air mass flow rate per beam [kg/s]
MassFlowRate	mWat_flow_nominal	0.094	Nominal water mass flow rate per beam [kg/s]
PressureDifference	dpWat_nominal	10000	Water-side nominal pressure drop per beam [Pa]
PressureDifference	dpAir_nominal	100	Air-side nominal pressure drop [Pa]
TemperatureDifference	dT_nominal	27.8	Nominal temperature difference water inlet minus room air [K]
HeatFlowRate	Q_flow_nominal	2832	Nominal capacity per beam [W]

Modelica definition

record DID632A_nozzleH_length6ft_heating = Annex60.Fluid.HeatExchangers.ActiveBeams.Data.Generic ( dT( f = {0,0.5,1}, r_dT= {0,0.5,1}), primaryAir( r_V = {0,0.714286, 1, 1.2857}, f = {0,0.8554, 1, 1.0778}), water( r_V = {0,0.33333,0.5,0.666667,0.833333,1,1.333333}, f = {0,0.71,0.85,0.92,0.97,1,1.04}), mAir_flow_nominal=0.0792, mWat_flow_nominal = 0.094, dpWat_nominal = 10000, dpAir_nominal = 100, dT_nominal = 27.8, Q_flow_nominal = 2832) "Performance data for Trox DID 632A for heating mode";

http://iea-annex60.org